Pocket Bluetooth Speaker Pro

[Item no. 450-06] Rev. 31.03.14

 

 

1 Introduction

The Sandberg Pocket Bluetooth Speaker Pro (referred to as ¡°the speaker¡±) connects wirelessly to a Bluetooth device such as a mobile phone or tablet computer. Despite its incredibly small size, the speaker delivers an impressive audio performance. The built-in battery gives 8 hours of playback so you are all set for a day on the beach, for example. Thanks to functions like next/previous track, play/pause, etc. the speaker also acts as a remote control for your device.

 

2 First use and charging

Before you use the speaker for the first time, the internal battery must be charged. Connect the enclosed USB cable between the speaker¡¯s small Micro USB connector and a USB port, either on a computer or on a USB AC mains adapter. While the battery is charging, the LED in the middle of the speaker displays a red light. When charging is complete the LED goes out.

NB: The LED flashes when the battery is running out of power.

 

 

3 Functions

Function
Button
Method
Turn speaker
on/off
Hold the button down for 3 seconds until a blue light flashes and a beep is heard. You also need to hold the button down for 3 seconds to turn off the speaker.
Pairing mode
Search for Bluetooth devices on the Bluetooth device to which the speaker is to be connected. See the documentation for this device to find out how this is done. The speaker is found under the name ¡°Sandberg 450-06¡±.
Play/Pause
During playback, press once to pause the music. Press again to continue playback.
Next track
Hold the button until the track changes to the next track on your playlist.
Previous track
Hold the button until the track changes to the previous track on your playlist.
Volume up
Press once to increase the volume gradually. The volume increases each time you press the button.
Volume down
Press once to lower the volume gradually. The volume goes down each time you press the button.
Answer call
Press the button once.

 

 

4 Troubleshooting

4.1 No sound

  1. Check that the speaker¡¯s built-in battery is charged or that the speaker is connected to a power supply via the enclosed USB cable. See section 2.
  2. Check that the speaker is correctly paired to the Bluetooth audio source. See section 3 and if necessary the manual for the Bluetooth device you are connecting.

If you need further help or assistance with your Sandberg product, you can visit the website http://helpdesk.sandberg.it.

Have fun with your Sandberg Pocket Bluetooth Speaker Pro!