1 Introduction

The Sandberg Bluetooth Stereo Headset Pro connects wirelessly to a Bluetooth device such as a mobile phone or tablet computer. Remote control your Bluetooth device with the track and volume controls on the headset. The built-in battery gives 8 hours of playback. Allows you to make hands-free and wireless calls.

2 First use and charging

Before you use the headset for the first time, the internal battery must be charged. Connect the enclosed USB cable between the headset’s Micro USB connector and a USB port, either on a computer or on a USB AC mains adapter. While the battery is charging, the LED displays a red light. When charging is complete the LED displays a blue light.

NB: The LED flashes when the battery is running out of power.

3 Pairing

The first time you want to connect the headset to a Bluetooth device you will need to pair the two devices. Once you have done this the devices will remain paired. Do as follows:

1. Place the headset and Bluetooth device within a secure range of 2-3 metres.
   
2. Set the headset to “pairing mode”: Hold the button down for 6 seconds until red and blue lights flash alternately (when you hear a voice after the button has been held down for 3 seconds you must keep the button depressed).
   
3. Search for Bluetooth devices on the Bluetooth device to which the headset is to be connected. See the documentation for this device to find out how this is done.
   
4. The speaker is found under the name “Sandberg Pro”. Connect to Sandberg when this is found. If you are asked for a password or PIN code, use “0000” (four zeros).

4 Functions

Function	Button	Method
Turn speaker on/off headset		Hold the button down for 3 seconds until a blue light flashes and a voice is heard. You also need to hold the button down for 3 seconds to turn off the headset.
Pairing mode		Hold the button down for 6 seconds until red and blue lights flash alternately and you hear a voice (see section 3).
Play/Pause		During playback, press once to pause the music. Press again to continue playback.
Next track		Hold the button until the track changes to the next track on your playlist.
Previous track		Hold the button until the track changes to the previous track on your playlist.
Volume up	V+	Press once to increase the volume gradually. The volume increases each time you press the button.
Volume down	V-	Press once to lower the volume gradually. The volume goes down each time you press the button.
Redial last number		Press the button twice quickly.
Answer call		Press the button once.
Reject call		Hold and press the button for 1 second.

5 Troubleshooting

5.1 No sound

1. Check that the headset’s built-in battery is charged or that the headset is connected to a power supply via the enclosed USB cable. See section 2.
   
2. Check that the headset is correctly paired to the Bluetooth audio source. See section 3 and if necessary the manual for the Bluetooth device you are connecting.

If you need further help or assistance with your Sandberg product, you can visit the website http://helpdesk.sandberg.it.

Have fun with your Sandberg Bluetooth Stereo Headset Pro!