Sandberg Usb 3.0 Hard Disk Clone Cable enables you to upgrade your notebook’s hard drive in three simple steps:

1. Connect the Clone Cable to your drive and to the USB port on your computer.
   
2. Download and run the Apricorn EZ Gig software from this link:
   www.sandberg.it/133-76download.html
   
3. Swap out your old notebook drive with your new one, and you’re done!

The Clone Cable is also perfect for transferring data to bare drives or for creating backups of your system. Now there’s no excuse when it comes to backing up or upgrading your system; just use your Sandberg Clone Cable.

EZ Gig enables you to clone your hard drive in three clicks

Apricorn's EZ Gig transfers all of your data, settings, OS and email from your computer's internal drive to an external drive in just three simple steps. Once the clone is complete, simply swap out your notebook drive with the new one and your notebook is instantly upgraded.

Step 1
Select your Source drive
This is usually your computer’s internal drive and is denoted by the prefix IDE.

Step 2
Select your Destination drive
This is your external drive connected to your computer by the Sandberg Clone Cable.

Optional
Data Select tool
Select files you wish to exclude from the clone, such as photos, videos, music or documents. This is helpful when migrating from a large HDD to a smaller SSD or when creating a Boot Disk.

Step 3
Press the "Start Clone" button
EZ Gig will clone everything to the drive on the Clone Cable. It really is that simple.